Product Category menu

Digital Indicator (CT-200)

Product Detail Information

Digital Indicator

Feature

The product shows signal of sense and micro voltage output sense, which used strain gauge (load, torque pressure etc), into digital display and analogue output as indicator, and intermediate or high sampling and comparison output are available. Mainly it is used in the place where the dynamic measurement (screw down or charging of liquid..) is necessary.

  • High resolving power (24bit ADC, 16bit DAC)
  • High accuracy (over 0.01% F.S) and stability
  • Unit conversion (kg, N, lb, kg/cm2, bar, Mpa)
  • Analog Peak Hold
  • Rapid sampling speed (1000 times/sec)
  • Calibration of actual load and sensor output value
  • Auto zero function (Display & analogue out zero)

Specification

Application sensor
Strain gauge type sensor
Sensor authorized voltage
DC 5V
Zero adjustment range
100% F.S(Auto zero)
Signal input range
0.5~3mV/V
Display range
-19999~+99999
Character height
7 segment LED 14mm
A/D converter
16bit 1000 times/sec
D/A converter
12bit 1000 times/sec
Zero variation
Within 0.5μV/°C
Sensitivity variation
Within 0.01%/°C
Output
DC 0~10V(4~20mA : Option)
Contact capacity
AC 250V 5A
Relay life span
Over 5 million times
Usage temperature range
-10°C ~ 60°C
Humidity
Less than 80% RH
Power
AC 90V ~ 240V 50/60Hz
Weight
About 600g

Function

  • Peak & Sample hold
  • Upper and lower limit comparison output
  • NG, OK decision function
  • 4 Relay out
  • Analog out(DAC)

Option

  • OP-01 : BCD paralle out
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 multi drop interface

Dimension